Blog Archives

Envious Mod’s Highlights (3D Printing Hits Case Modding)

Here’s some highlights on our favorite builds:

StarCraft (Day Zero) Case Build:


Custom LEDs light up the fabricated HD and SSD rack A ton of custom featutes were fabricated to give the case this look



One of the final pics of the StarCraft Day Zero case we built You can see that a lot of customization was done to the rear side of the case. We also added a top removable panel that lets you easily access all the power supplies wiring. Two side mounted 120mm Corsair fans were added to help keep the GPUs cool.


We added adjustable front louvers to exhaust air from the relocated PSU.


The top 3 X 120mm XSPC fans help exhaust hot air out the top of the case. With the extensive air-cooling setup we decided to add fan controller so they can be adjusted manually or through software.


Since we moved the PSU to the optical bay we added an extensive cable management setup. A section of the motherboard tray has been cut out to allow for quick CPU cooler swaps.


Wireless controllers for the RGB LEDs have also been added.


Mini Mods:


We built this GPU backplate using several different types of acrylic and vinyl.


This colored acrylic backplate was made for a sound card.



We custom made this optical bay switch panel that has an indicator light for each switch.


This GPU backplate was made using two seperate peices of acrylic



This hand made Terran Marine has been hand painted to give it a battle hardened look


  We custom modded this Sythe CPU cooler with acrylic and 3D printed parts  


We made a custom mount and display for a FrozenQ res. We also replaced the cold cathode with LEDs. We custom sleeve and make cables


Modding Highlights: Here’s a few highlights of builds/mods we’ve done for customers at Envious Mods

    If you interested in having custom case mods, pc builds or 3d printed parts done; contact Envious Mods


3D Printing Hits Case Modding

3D printing has taken the manufacturing industry by storm but, it’s also recently weaved it’s way into PC Case Modding. PC Case Modding is a way that users can customize their desktops to be an extension of their personalities. Much like how we love to mod our 3D printers to fit our needs and style. I have found that 3D printing has made it’s way into many sub markets but, case modding wasn’t one of those until more recently. Being a huge fan of both modding and 3D printing; I decided it was time that they both met.

I grabbed a 10+ year old case and tore into it, promising to myself that it would be something that had never been seen before. The build soon became known as, “The Dark Side” case mod. I tore into it taking my style and 3D printer along for the ride. The case started out as PC version of Macs G5 styling.

Its 3 months later and I still haven’t let go of the build. Almost all of the 3D printed parts on this case have been designed and built from scratch by me. There is still a long way to go but, this build has already grabbed the attention of thousands via OverClock.Net. It’s build log (from start to current date) can be found in the work log section of case modding or by clicking HERE.

Here are a few highlights from the build:





The entire front panel of the case is made up of 3D printed parts


The top hinges and slides back to offer up access to parts of the case that are typically hidden. 



The side panel has been remounted to make them suicide doors sitting on farrari hinges. 


Custom brackets were designed to merry the bottom skids. These skids keep the case off of the ground which helps with cooling.

We’ve made a ton of progress lately. Here’s some of it:



This is a motorized flip out touch screen that is used to monitor system information. It can also be used as an extra monitor. It has a intigrated 60 gig hard drive as well. 


This is our side mounted 200mm Antec fan. Custom brackets were made to mount it to the panel. 





There are custom ordered, spring reinforced draw latches for the side panel. 


We added a carbon fiber wrapped flame on the side. It’s back lit and also has a fan mounted to exhaust air from the case. 


This is a custom built ReaperN1 avatar that has been added to the top of the massive CPU cooler. 


Updated pics of The Dark Side Case Mod:


The Dark Side Case Mod is getting close to completion but, it still has lots of work to go. 


Here’s the custom built GPU backplate with Gigabytes logo shining blue. 


I decided to carry the ReaperN1 logo over to the center of each fan on the case. 


Custom built and 3D printed cable management setup for the wiring that goes behind the motherboard tray. 

This case is well on it’s way towards completion and the build will continue on

Custom made parts done through Envious Mods.

Check out Envious Mods by clicking HERE

%d bloggers like this: