Hobbed Extruder Bearing
friend an I were putting together an extruder and a thought came through our heads. Why not hob a bearing for added traction? The bearing im referring to is the bearing in the extruder that pushes against the filiment for feed and retraction. Traction on both sides of the filiment surely would make some difference in the overall scheme of things. The hard part is trying to hobb a bearing. I’ve seen ones in the past that have a half circle like groove which help with alignment.
So I went about making a groove in a bearing as well as hobbing it. I used a customized bearing that my friend had made just for this part of the extruder. He had these bearings made with a lip on either side to sit perfectly in the door of the extruder so no piece of all thread is needed. I took some pictures but the camera on my tablet isn’t the best. I will try and get better pics in the future. I have yet to try it out but I will update as soon as I do.
Owens posted this to me:
The Steve’s Extruder that SeeMeCNC uses on some of their printers is set up with two hobbed pulleys on parallel shafts, both driven by a rather complicated gear train. I have no idea whether it works better or worse than what we use, though they are apparently happy with it. I’ve also seen pictures of a prototype extruder with a driven hobbed bolt and a hobbed pulley as idler, but I can’t remember where.
My response was this:
It would make sense that hobbing on both sides will increase traction, intern would help with alignment and make extrusion/ retraction more consistent. See me cnc has always been on the cutting edge of parts and I’ve heard very positive responses about their extruders. I plan on making several variations of this setup to see if their is a combination that will improve extrusion. This is something I will test on a custom bowden setup as well. Bowdens are known to have retraction issues. My overall goal is to make a reliable bowden setup that helps eliminate or reduce the downfalls of a bowden setup.